Gear Hobs for Straight Splines
2021-10-06 08:38:22
jiangxingTools
3027
Gear Hobs for Straight Splines
1, Spline Data: 1),No. of splines; 2),Spline width; 3),Out side dia. ; 4),Root dia. ; 5),Form dia. ; 6),Amount of chamfer- for semitopping hobs; 7),Under-cut details, if required, 8),Shoulder details, if applicable; 9),Basic profile reference standard; 10),Materia? & its hardness at hobbing stage
2, Hob Data: 1),Overall size; 2),OD x Length x Bore; 3),No. of starts; 4),Hand ofthreads; 5),Type of hob Finishing/ pre-grinding; 6),Type of profile- Semitop/nontop/ with lugs, with shoulder etc.; 7),Amount of grinding allowance wherever applicable
Please contact us for more details on gear hob for straight splines.
相關(guān)文章
-
STD Module Gear Hob Cutter with DIN3972 Tooth Profile
STD Module Gear Hob Cutter with DIN3972 Tooth Profilethis is finishing hob, STD tooth profile of hob... - PM-HSS ASP2052 for Shaper Cutter and Gear Hob Cutter
- PA20° PCD 180mm β15° Disk Type Gear Shavng Cutter with Module m1.25~m6
- PA20° Profile DIN3972 Standard Pre-grinding Gear Hobbing Cutter with Module m2.25
- PA30° DIN5480 Involute Spline Gear Hob with Module m3.5
- HSS M2, M35 Spline Hobs for Spline Shafts
- Timing Pulley Hob for STS 14M
